Envoy NT9010A Przewodnik Instalacji Pobierz pdf (Strona 25)

Section 2.2: Changing How the NT9010 Works For Users

• Attribute 4: NT9010 Telephone Access

This attribute allows the user to access the security system from a telephone

when an access code is required.

• Attributes 5-6: For future use

• Attribute 7: Bell Squawk on Arming/Disarming. When this attribute is turned

on, the bell will squawk when the access code is entered to arm or disarm the

system. For example, you can use the arm/disarm bell squawk attribute to have

wireless key access codes squawk the bell, while other codes are silent. To do

this, enable attribute [7] on all access codes associated with wireless keys.

NOTE: If you enable the Bell Squawk on Arming/Disarming option (section

[014], option [1]), the bell will sound arm/disarm bell squawks for all access

codes, regardless of the programming for attribute [7] (see 2.2.5 Arming

and Disarming Options on page 22).

Installer’s Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [006]

Master code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [007]

Maintenance Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [008]

Master Code Not Changeable . . . . . . . . . . . . . . . . . . . . . Section [015], Option [6]

Code Required for Bypassing Section [015], Option [5]Telephone Access CodeSec-

tion [807]-[020]

2.2.3 Voice Prompt

Interface

You can customize the voice prompt interface for the NT9010 users by turning indi-

vidual prompts on or off, and by changing how the NT9010 system announces the

current time.

To have the NT9010 system announce the time in am/pm format (e.g. 9:00am), turn

on the Clock is AM/PM option. To have the system announce the time in 24-hr for-

mat (e.g. 21:00), turn on the Clock is 24 Hour option.

The NT9010 system is designed to be easy to use by reminding users of available

commands. For example, after a user accesses the system, they can press [✱] and the

NT9010 system will announce the [✱] commands that are available.

You can avoid confusing users by turning on only the prompts that apply to the sys-

tem you are installing. The options in sub-section [004] only affect the NT9010 sys-

tem [✱] command prompts: if a prompt is disabled, users will still be able to enter the

command it refers to.

Sub-section [003] determines which Status prompts the user will hear. If an option is

“ON”, the system will announce the prompt when the appropriate condition is

present. If an option is “OFF”, the system will not announce the prompt if the condi-

tion is present. For example, if you turn off the “Zone Tamper” prompt, when a zone

is tampered on the system, the NT9010 system will not announce it to the user.

You can also have the NT9010 system announce the names of zones that are

opened or closed by turning on the Verbal Chime option. When this option is

turned on, if the Verbal Chime for Zone Openings is also enabled, whenever a

zone with the Chime attribute enabled is opened, a series of beeps will sound and

the NT9010 will prompt (for example):

“Front Door”

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

Envoy NT9010A Przewodnik Instalacji Strona 25

Komentarze do niniejszej Instrukcji